Return to Product Index
 

Signal Converter / Transmitters

Series 100 Din-rail Or Gear Plate Mounting

Bipolar Signal Converter - BSC133

Convert input signal to bi-polar DC signal.
Common Applications - Signal conversion, Hydraulic drive.

Resistance Transmitter - RT124

Convert resistance to DC signal.
Common Applications - Actuator feedback, Loading station for manual adjustment of process signal, Fixed output current source, Signal generator for system check, Resistance-change level devices.

Strain-Gauge Transmitter - WT127

Converts resistance bridge to DC signal.
Common Applications - Weight measurement, Interface to loadcells or piezoresistive devices.

Frequency Transmitter - FRT150

Convert pulse to DC signal.
Common Applications - Speed monitoring.

AC Active Current Transducer - ACT141

Convert AC current to DC signal.
Common Applications - Interface to current transformer (C/T), Load monitoring.

Pressure to Current Converter - PIC176

Convert pressure to a DC signal.
Common Applications - Pressure monitor.

Series 200 Din-rail Mounting

Analogue to Pulse Converter (v1) APC253

The APC253 is a low cost universal analog to pulse conversion module specifically designed to interface to PLC's and other systems requiring pulse inputs.
The APC253 can be configured for a wide range of process and probe inputs (for full range see ordering information). Output modes available are NPN, PNP, or DC Pulse. The output frequency range can be factory calibrated for any frequency span from 10Hz up to 10kHz, with low scale frequency offsetting also available. eg. Input 0-10Vdc Output 1-2kHz.

Signal Splitter - SSP235

Produces two DC output signals from one input signal.
Common Applications - Signal splitting, Range splitting.